Polishers

Multi Use Polisher ATP-2200

To satisfy of our customers need for polisher mobility,efficiency, and reduced operationg cost, FiberSource has introduced the new ATP-2200 polisher and polishing system.

Features

High Throughput, High Yield and Cost Efficiency.

ATP-2200 can polish 24 ferrules at one time with individual pressure system. Moreover, due to adopting NTT-AT's unique semi-individual polishing trajectory, ATP-2200 enables you to prevent scratch damage from spreading fragments, and decreases the wasted polishing film by using square film.

Motion Mechanism

A semi-individual trajectory is used, resulting in less scratches on the fiber. If there are objects on the film, a semi-individual trajectory minimizes the damage to only a few ferrules. This approach should increase the yield of your product and reduce waisted polishing film.

Others	ATP-2200

Simple Operation

It is easy to set ferrules into the polishing jig, and set the jig into the main body.

Versatility

Advanced PC 2.5mm & 1.25mm ferrules for all connectors, SC & MU housing ferrules, MT/MPO/MT-RJ ferrules & APC 1.25mm ferrules

2.5 mm Ferrule	MPO-MTP	SCU Plug In	SCA Plug In
FCU Plug Type	FCA Plug Type	MU Plug Type	LC Plug Type

Programmability

ATP-2200 has the programming function of the polishing time and the turning speed of the polishing plate. You can set 9 programs which include 9 processes each. Solves the problem of resetting the processes each time the connector is changed.